Changing a halogen floor lamp is very simple. In order to save on your energy costs, you can replace a halogen bulb with an LED bulb.
In addition, LED lamps last on average about 25 times longer than halogen bulbs. There are different LED lamps that are suitable for replacing halogen lighting.
Switching from halogen to LED, the advantages
The main advantage of converting from halogen to LED is improved energy efficiency . Which also means savings on energy costs. LED technology is also better for the environment.
When making the switch from halogen to LED, there are a few things to consider to ensure you purchase the right LED lighting product, whether it's an LED bulb, LED fixture, or any other type of LED lighting.
Check the base of your current halogen lamp
Without a doubt, the first point to consider is the base of your current lighting. This way you know what voltage your halogen lamp works at . The lamp base is suitable for either 12 volts or 230 volts (mains) and never both.
When switching to LED, it is important to choose a product that has the same base so that you can easily replace your old halogen floor lamp with an LED.
The base or cap is the part of a lamp that connects it to a suitable light fixture . E27 is one of the most common bases for floor lamps, while GU10 is one of the most popular for spotlight bulbs.
Perhaps you would like to replace a GU5.3 halogen with an LED ? Be aware that there are many different types of bases, so be careful to choose the right one.
Determine if you need dimmable LED lights
Being able to dim your lights is handy in all sorts of situations. It allows you to determine the amount of light available at any time so you can easily adjust it to your needs whenever you want. It is important to know that not all LED lights are dimmable.
If you already have this feature with your current halogen lighting and want to keep it, you will need to make sure to purchase dimmable LED lamps.
You should also be aware that there is no guarantee that your current dimmer will be compatible with a dimmable LED light. This is due to the difference in wattage between halogen and LED lights .
Determine the required light output
In the past, people looked at the wattage of a light bulb to determine light output. But wattage is actually a measure of how much energy a bulb uses rather than how much light it emits.
Because LED bulbs are more efficient, they use less energy to produce the same amount of light as halogen street lights, for example.
Therefore, when comparing a halogen lamp to an LED lamp, it is important to look at the number of lumens rather than the power .
Choose the beam angle
The beam angle of a light in degrees specifies over which surface its beam spreads. The smaller the beam angle, the more intense and directional the light will be . While a wider angle will give a light that produces a softer and more diffuse beam.
When purchasing new lights, be sure to choose the right beam angle for your situation . Narrow angles are used for accent lighting and wide angles are used for more general lighting.
Choose a color temperature
The last aspect to consider when purchasing a new floor lamp or light fixture is color temperature . Color temperature refers to the color produced by the light.
It is expressed in Kelvin and this number defines the general color of light which varies from warm yellow to cool blue. Some of the most common color temperatures are highlighted below:
- Extra warm white = 2400°C
- Warm white = 2700°C
- Cold white = 3700°C
- Daylight = 6200°C
Switch to LED lights to save money
LED lamps are 90% more energy efficient than halogen lamps . Divide the wattage of a halogen lamp by 10 and you know the maximum wattage of the LED lamp .
If we assume 3000 hours of usage per year and a KwH rate (electricity tariff) of 0.20, you will save more than 27.6 per bulb in energy costs.
Leave a comment