Do you want to replace the bulb in your ceiling light or replace your ceiling light? Of course, it is entirely possible to do the work yourself. You can also decide to renovate it even if it does not have any damage or failure. So, here is how to unclip it.
The essential tools for unclipping a ceiling light
To unclip a ceiling light, you need to use different equipment or accessories. Since it is located on the ceiling, you will need a ladder or stepladder . You will also need a screwdriver, a non-contact voltage detector and a headlamp . These different tools and accessories are necessary to safely disassemble the light fixture.
You also need to make sure that the ladder or stepladder can stand properly on the ground. Similarly, for the voltage detector, you need to check if it works very well . To do this, simply hold it near a lit bulb. If it glows, it means that the equipment is working. Also, make sure that the headlamp is working or if the batteries need to be replaced.
Turn off the power and remove the light bulbs
The first thing you need to do when dismantling the ceiling light is to turn off the power . To do this, you need to deactivate the circuit in the fuse box. This is very important to ensure safe work . To check that there is no longer any risk, you can check by pressing the light switch. You should avoid any attempt to work with the light fixture live.
If the bulbs are exposed, you need to unscrew them . To do this, simply turn them counterclockwise. If they are fluorescent light boxes, then you need to slide the cover out of place. Then, you need to unscrew each bulb as before.
Remove cover before removing bulbs for recessed fixtures
If these are recessed lights , then you need to gently turn the knob in the center of the cover, always counterclockwise. To remove the screw on the base of the light fixture, you can use a screwdriver or a drill . If these are bolt-on lights, in this case, you just need to remove each bolt while making sure to support the cover well.
Remember to save your bulbs as you may need them for your new light fixture or ceiling light. Now you have successfully removed the bulbs and unscrewed the cover.
Disassemble the mounting bracket
Now you need to unscrew the mounting bracket in order to remove the mounting plate. To do this, you need to hold the plate while you loosen the screws that hold the mounting. Now, you have successfully disassembled the ceiling light completely . However, you need to keep the power off until the new light fixture is in place.
As you can see, it is not very difficult to unclip a ceiling light . All you need is the necessary tools to carry out the disassembly, a little practice and that's it.
However, if you think you won't be able to do it or if you suffer from vertigo, don't hesitate to call a more competent person or even a professional to remove the ceiling light safely without risking damage. In addition, by hiring a specialist, you will have nothing to do but wait for the intervention to be completed.
Some tips for choosing the right ceiling light
Are you planning to replace your ceiling light? Now you know how to do the dismantling. However, it is also important to choose the equipment that will replace the old one.
It is important to note that if it was a pendant light , then you need to find a pendant light for replacement and if it is a recessed light , you will have to do the same, unless you are willing to do some renovation work. Otherwise, here are the different points to consider to choose a ceiling light .
- The size of the ceiling light depends on the size of the room to be lit. This must be in perfect harmony for the functional side and for the aesthetic side.
- The type of lamp to use. LED lamp is an excellent option.
- Light intensity according to your needs.
- The style according to your interior decor.
Leave a comment