LED Strip | LEDSTRIP (RGB and RGBW)

The RGB LED strip by Faro Barcelona creates colourful atmospheres in a living room, bedroom, bar or shop window. It is sold in 5 m reels and runs on 24 V.

RGB COB or RGBW: what is the difference?

The RGB COB version mixes red, green and blue to create every colour. Thanks to COB technology, the LEDs are so close together that the light forms a continuous line, with no visible dots. It uses 15 W per metre, can be cut every 25 mm and comes in IP20 for indoors or waterproof IP67.

The RGBW version adds a white LED to the three colours: on top of colourful atmospheres, it gives a true white for everyday lighting. It has 288 LEDs per metre, a colour rendering index of 90, and can be cut every 62 mm. It comes in IP20.

What is the power supply for?

A Faro LED strip runs on 24 V: it does not plug directly into the home's 230 V. The power supply (also called transformer or driver) sits between the mains and the strip and converts 230 V to 24 V. Without it, the strip cannot light up. The "With power supply" variants include the 24 V 120 W power supply that Faro recommends for one reel. It is IP20 protected and must be installed in a dry place.

To choose the colours, you need to add an RGB or RGBW controller, which is not included: with the standard power supply alone, the strip simply switches on and off. For the RGBW version, Faro also offers a Casambi power supply. The Casambi power supply does the same thing, but can also be controlled wirelessly, via Bluetooth, from the Casambi app on a smartphone or tablet: you switch on, adjust brightness and create scenes without additional wiring.

Where should this LED strip be installed?

At home, it lights a TV unit, a headboard, a child's bedroom or the underside of a staircase. Discover our LED lighting too.

For professionals, it livens up a bar, restaurant, shop window or sheltered facade. Find other models in our professional lighting section.

Electrical connection must be carried out by a qualified electrician. For maintenance, switch off the power, let the light cool down, then wipe it with a soft, dry cloth.