DIY is an activity that seems to attract more and more people. So much so that today, you can make your own lampshade . It goes without saying that there are different steps to follow so that it serves as decoration in your home. We explain the art and the way to make a lampshade with 2 circles .
The tools needed to make your lampshade
Before you start making your lampshade with two circles , you will need the following equipment :
- 100 m of soft, fine string like linen thread,
- 2 conical lampshade structures with a small diameter recovered from an old lamp,
- Pliers for cutting metal plates,
- Shears,
- Polyphane or cardboard,
- A metal circle for the bottom,
- A metal circle for the top,
- A pot of glue,
- A socket with a diameter proportional to your lamp,
- Sons.
Once you have gathered the necessary materials, you can move on to the step of making your lampshade with 2 circles .
The process of making a lampshade with 2 circles
The first step is to remove the sticky paper from your polyphane . You must place the sticky part of the polyphane on the back of the fabric. Using a pencil, you must draw a line to outline the shape of the polyphane while leaving a small margin on each side.
Next, you need to cut the fabric by following the pencil line while respecting the template of the socket. You will glue the margin of the fabric towards the polyphane on the right side . Once this is done, you need to join the two sides using glue. Be careful! It is required to respect a margin of approximately 1 cm.
Next step, you need to place the clips on both ends so that the glue has time to dry . You then need to put the two metal circles from the bottom and top respectively on the ends, so that you can glue the edges of the cardboard or fabric to them. It is highly recommended to respect the diameter of the lampshade by assembling the two sides using the thin wire.
You will end up with a lampshade that you are free to customize as you wish . For the decoration of this element of your lamp, you are free to proceed according to your desires and fancies.
Choose polyphane to make your lampshade
For a lampshade, it is advisable to use white self-adhesive polyphane . It is often used for most fabrics as well as papers. Note that there are two thicknesses available including: 25/100 for small lampshades. As for lampshades with a diameter of 40 cm, there is 30/100.
For creative DIY and decoration activities , many people use cardboard. Since it is a flexible but resistant material. It allows you to create lampshades and also coasters. As for polyphane, it is a laminated paper that has a thin layer of glue on the surface and is just as practical.
Let's focus on the main advantage of polyphane
The advantage of polyphane papers is that they do not fear the heat of the lamps . Which makes this material the ideal covering for your lampshades. Let's add that they are transparent or more or less opaque, it all depends on the effect you are looking for for your decoration.
Polyphane paper for lampshades has an adhesive side on which you can stick selected elements to your lampshade. For example, we have paper or even threads and fabrics.
A vintage decoration for your homemade lampshade
To decorate your lampshade with 2 circles, it is advisable to collect the wallpaper scraps, if you want to give it a little vintage touch. When you proceed with the gluing, it is required to always start from the edge, that is, from the top to the bottom of your lampshade.
The process is quite simple, since instead of the first piece, you only have to glue the lampshade with a brush. It is better to use a special glue varnish and put it on the paper.
Leave a comment