Light Switch | DOUBLE TOGGLE

The Double Toggle toggle switch by Buster + Punch is a 1 gang switch with 2 knurled solid metal toggles, mounted on a flat plate. Its plate measures 9 cm by 9 cm, it is rated 10 AX at 220 to 250 V and comes with or without a logo, in brass, steel, smoked bronze, black or white.

A double switch with 2 solid metal toggles

This double switch brings together 2 toggles on a single 1 gang plate. Each toggle is made of solid metal. It features the cross knurling, called Cross, a diamond-cut crisscross pattern.

The flat plate combines stainless steel and polycarbonate. It is held in place by the brand's signature slotted screws. Once fitted, it leaves a 6.5 mm shadow gap with the wall.

Two plates are available. The first bears the Buster + Punch logo, the second carries no marking. On this switch without a logo, only the 2 toggles and the screws stand out from the wall, and the toggles and the electrical specifications remain the same.

Double two-way switch: 2 lights on a single plate

This double two-way switch houses 2 toggle modules in a single gang. Each toggle controls its own light, for example the ceiling light and the wall sconces in a living room. Each one works as a two-way switch, from 2 locations, or as a one-way switch.

It is rated 10 AX at 220 to 250 V, 50 Hz. It is not suitable for motors, fans or other large inductive loads. It is designed for indoor use, away from moisture.

The box contains 1 wall plate, 2 toggle modules and 2 finishing kits for the toggles. The switch is installed on a European-standard wall box, mounted flush with the wall. The electrical connection must be carried out by a qualified electrician.

Switch in brass, steel, smoked bronze, black or white

This brass switch is also available in steel, smoked bronze, black and white. Black and white stay discreet on the wall. Only the relief of the 2 toggles gives them away.

Brass and smoked bronze bring a warm note to a living room or a dining room. Steel, more neutral, goes well with the other metal elements in the room.

This switch can be combined with the brand's matching dimmers, sockets and USB modules. That way you keep the same finish in the hallway, the kitchen or the office. For a single toggle per gang, the brand offers the Toggle switch, with linear or cross knurling.

Frequently asked questions about the Double Toggle switch

How many lights does the Double Toggle switch control?

It controls 2. Each toggle has its own module and operates its own light, as a two-way or one-way switch.

What is the difference between the version with a logo and the version without a logo?

Only the plate changes: one bears the brand's logo, the other is left plain. The toggles, their knurling and the electrical specifications are the same.

What are the dimensions of the plate?

The plate measures 9 cm wide and 9 cm high.

Can it be installed in a bathroom?

No. The switch is designed for indoor use and is not suitable for damp environments.

Which finishes is it available in?

In 5 finishes: brass, steel, smoked bronze, black and white.