The pagoda can be described as a great classic of the abajourists who make custom-made bat-shades . It is made of natural fabric, hand-sewn and lined.
Sometimes the fabric is laminated on polyphane. Thus, the pagoda offers different decorative perspectives for your lampshade . Especially since it is suitable for other types of lighting .
Some suggestions for repairing a lampshade
In case your lampshade is very damaged, know that you have the possibility of keeping the metal frame . It is required to take off the fabric or glued paper by being meticulous. Only then can you replace the covering.
There are different types of pagodas, including the Japanese-inspired pagoda which is usually made with Indian fabric with flower and bird motifs.
If the lampshade is conical, it is possible to fold the paper accordion-style. Once you have pierced the top, you will need to attach it to the top of the frame by sliding a wire through it. In order to tighten the bottom of your lampshade, you must undertake the same process.
This is easiest to do with a circular lampshade . However, you must be careful to avoid contact between the bulb and the lampshade, otherwise you could be at risk of fire.
Consider the height of the lampshade
Before covering your pagoda lampshade , it is necessary that you choose the appropriate dimensions . The height of the lampshade, for example, must be proportional to the height of the lamp base.
It is required that the base be visible over the entire height and that the lampshade does not descend too low, but that it can still hide the socket.
Pay attention to volume to ensure consistency
For the volume of the top, it is advisable to respect a certain balance. Starting with the width of the lampshade. For a conical lampshade, the diameter should be between 1.5 to 2 times the width of the lamp base .
The height of the lampshade should not exceed more than 5 cm compared to that of the lamp base. Another point of harmony, the shape of the lampshade must follow the shape of the lamp base .
That is, an oval lampshade goes with an oval base, if it is round, then the base must also be round, and so on.
Choose the right color and material for the lampshade for uniformity
The color as well as the material are correlated with the style you want to inspire. It is important that you take into account the following elements, well before resorting to your pagoda lampshade:
- The color of the walls ,
- The color of the curtains ,
- The opacity of the material ,
- The style of the lamp base …
For a soft and bright atmosphere , it is better to choose white and light colors. In the case where the room has several lamps of different sizes, it is advisable to dress them in the same color.
For what reasons? Well, simply so that your lampshade forms a unity with the style of the house.
Choose the pagoda that suits your decor
The Japanese-inspired pagoda has already been mentioned. But, there are others like the classic festoon pagoda . The making of this pagoda for lampshade will be done with an ivory silk which is lined with a white cotton .
As for the finish, you can opt for a white or gold lizard as well as a pearl barn in the same tones. Your choice depends on the style you want to give to your lamp.
Do you want more sobriety? It is advisable to choose an ecru silk pagoda , you can match it with an old lamp. There are a thousand and one ways to customize your lampshade . You can give it a rather vintage style or modernize it .
In addition, there are customizations with ribbons, stencils, beads or even charms. As for the maintenance of your lampshade, you only need a little cleaning to revive its colors. It is advisable to start by checking the material with which it was made.
Leave a comment