Learn the essentials:
A magnetic track is a lighting system comprising a very slim aluminum profile, a power supply, and light modules that attach to it magnetically. Inside the profile, two conductors carry very low-voltage current, usually at 24 V. Each module has contacts and magnets that provide both mechanical support and power as soon as it is placed in the track. You can then slide it to move it or remove it and place it elsewhere. At Lustria, the online lighting specialist, the selection is dedicated to the NESO system by Faro Barcelona.
The 230 V mains current does not flow directly through the track. An electronic power supply, also called a driver, converts this current to very low voltage before sending it through the profile. This design adds safety during handling and allows very compact modules to be used. The power supply must be selected based on the combined wattage of all installed modules, with a safety margin. A qualified electrician must size and connect the power supply.
The three-phase track operates at 230 V and holds spotlights fitted with an adapter that locks into the profile. It remains the standard in stores and galleries that use large spotlights. Magnetic track takes a different approach: a much more discreet profile, smaller modules, and tool-free installation of the light fixtures. It is particularly suited to contemporary interiors, low ceilings, and projects where the track should go unnoticed. The two systems are not compatible with each other. The track spotlights collection features all spotlights for track, magnetic or otherwise.
The versatility of a magnetic track lies in the variety of modules it accommodates. A single track can combine spotlights for highlighting, linear lights for illumination, and pendant lights for decoration. This custom configuration provides complete lighting from a single track and power supply.
Adjustable spotlights are the most commonly used modules. Their heads swivel and tilt to direct light toward a painting, shelf, table, or countertop. In the NESO range, the POINT and TOP models serve this purpose, while ART and LINSE provide a more precise beam for highlighting objects or works of art. The HOLE module, with its deeply recessed light source, prioritizes visual comfort and reduces glare.
Linear lights cast continuous light along their entire length. They provide general lighting for a room, above an island, desk, or hallway, and visually extend the line of the track. The UNIK and LINE modules in the NESO range belong to this category. The WASHER module, a wall-washer, casts grazing light across the full height of a wall, highlighting the texture of stone, plaster, or wood paneling.
Some magnetic tracks also accommodate pendant lights, which hang from the track by a cable and add a decorative touch above a table or counter. The NESO range includes models such as LUMINA, NINA, DIANA, ANNA, and a suspended version of UNIK. They connect to the same circuit as the spotlights, eliminating the need for multiple ceiling outlets.
| Module | Function | Examples NESO |
|---|---|---|
| Adjustable spotlight | Accent lighting, highlighting | POINT, TOP, HOLE |
| Precision spotlight | Artwork, display case, object | ART, LINSE |
| Linear light | General lighting | UNIK, LINE |
| Wall washer | Grazing light on a wall | WASHER |
| Pendant light | Decorative lighting above a table | LUMINA, NINA, DIANA, ANNA |
The NESO system from Faro Barcelona is available in two track ranges. The standard NESO range features a profile and modules in a classic size, suited to large rooms and commercial spaces. The NESO SLIM range uses a narrower profile and slimmer modules for a minimalist look. Modules from one range cannot be installed on the other range's track, so you need to choose the track range before selecting modules, then stick to that range throughout your project. Each product page clearly indicates the range.
The track can be installed in three ways. For surface mounting, it attaches directly beneath the ceiling without requiring a cutout. For recessed track installation, it's built into a false ceiling and sits flush with the surface, creating an almost invisible line of light. For suspended installation, it hangs from the ceiling on cables, making it suitable for high ceilings and open spaces. On NESO product pages, the “with track” option specifies the type and length of track included with the module.
As with any LED lighting, light quality depends on color temperature, color rendering, beam angle, and luminous flux. These technical specifications are listed on each product page and are worth comparing before you put together the track.
Warm light, around 2700 to 3000 K, creates a soft atmosphere in a living room, bedroom, or restaurant. Neutral white, around 4000 K, is better suited to a kitchen, office, or store. On the same line, it's best to keep the same color temperature for all modules to achieve uniform, pleasant lighting.
A narrow beam concentrates light on an object, while a wide beam illuminates an entire area. Combining narrow-beam spotlights with diffusing light bars provides both depth and general lighting. Visual comfort also depends on the position of the light source: recessed-source modules are less likely to cause glare, which is especially useful above a sofa, desk or table. Compatibility with a dimming system depends on the power supply selected and should be checked with the electrician.
Magnetic track lighting works just as well in homes as in commercial spaces. Its slim profile and modularity make it a particularly interesting solution for rooms whose layout may change over time.
In a kitchen, a magnetic track running parallel to the countertop can hold light bars for task lighting and a few spotlights aimed at the shelves. Above the table or island, one or more pendant lights on the same track create a decorative focal point without requiring an additional electrical outlet.
In a living room, the track lets you combine soft ambient lighting with accent spotlights for a work of art or bookcase. In a hallway, a continuous line of light guides the eye and makes the space look larger. In the office, low-glare light bars provide lasting visual comfort.
In a store, magnetic track lighting adapts to changing window displays and product displays: add a spotlight, move a light bar or replace a module in seconds. In a hotel or restaurant, it creates different atmospheres in different areas, with a minimalist aesthetic that blends into the architecture. Our commercial lighting selection features other solutions for these spaces.
Connecting the track and its power supply is electrical work that must be entrusted to a qualified electrician. They choose where to position the power supply, surface-mount or recess the track, connect everything and check that the power supply can handle the combined wattage of all the modules. Once the track is in place and powered, the modules simply attach magnetically, following the manufacturer's instructions.
The number of modules depends on the track length, the area to be lit, and the intended purpose. It's best to define the areas to be lit, then position the modules where they're needed, rather than spacing the spotlights evenly. The modules' total power must never exceed that of the power supply, and this is something the electrician checks before commissioning.
One of the great advantages of the system is its flexibility. A new piece of furniture, a new artwork, or a different room layout? Simply move, add, or change the modules, always within the same track range and subject to the power supply’s capacity. This flexibility makes magnetic track lighting a lasting investment that adapts to life at home or in a commercial space.
Here are answers to the most frequently asked questions about magnetic LED tracks. The product page for each module is the definitive reference for the range, power, and dimensions.
It is a very low voltage lighting track to which spotlights, light bars, and pendant lights attach magnetically and can be moved by hand.
NESO tracks operate at 24 V, using a power supply that converts mains current.
No. Each module can only be installed on the track from its range, as specified on the product page.
No, connecting the track and its power supply must be entrusted to a qualified electrician. The modules can then be installed without tools.
Yes, the NESO range offers magnetic pendant lights that connect to the same track as the spotlights.
The NESO product pages offer a track option that specifies the type and length of track included.
Since we started, more than 6,000 customers have trusted us to light their homes.
Pay in installments with Klarna, or with your bank card in complete confidence.
Free, tracked delivery, from packing to your door.
Do you have a question? Our technical team is at your disposal.