Wall Sconce | LINO

The Lino wall sconce by Sollux Lighting is a natural wood tube, standing vertically on a thin white steel fixing, that lets the light escape from its 2 ends. It measures 6 cm long, 8 cm wide and 30 cm high, and takes 2 GU10 bulbs.

A column-shaped wooden wall sconce

The light wood cylinder shows a regular grain along its whole height. The natural veins make each piece slightly different. Its slender shape visually stretches the wall and gives the room an impression of height.

The white fixing stays discreet behind the tube. This wooden wall sconce seems to float almost in front of the wall, especially on a light wall.

At 6 cm long, it keeps a very slim silhouette, easy to place on a narrow section of wall. It brings the warmth of wood and the simplicity of a straight line to the wall.

A double beam upward and downward

When lit, Lino projects one beam toward the ceiling and another toward the floor. The wall is covered with 2 streaks of light that extend the vertical of the cylinder. Check with a level that the tube is truly vertical before tightening, because a tilted tube would distort the pattern of the beams.

This indirect lighting never aims at the eyes. It creates a calm atmosphere, which suits living spaces and resting areas alike.

The beam angle changes the length of the streaks of light. A narrow angle draws thin, precise rays, while a wide angle diffuses more across the wall. On a stone or brick wall, the grazing beams bring out the material. Fit 2 identical bulbs to keep the beams balanced.

Natural wood in decoration

Natural wood echoes parquet floors, beams and light wood furniture. It fits into a modern, Scandinavian or rustic interior.

On a concrete or gray stone wall, it adds a warm touch that softens the whole. The room immediately seems more welcoming.

In a minimalist interior with white walls, this wooden light fixture becomes the only warm note on the wall. It draws the eye with great restraint. Repeat the same light tone in a frame or a shelf for a coherent whole.

Where to install this sconce for a living room or bedroom?

In a living area, this living room sconce is placed on either side of a sideboard, a mirror or a fireplace. 2 sconces create an elegant symmetry and frame the room with a warm light. In a bedroom, a sconce on each side of the bed gives a soft light that does not shine directly on the face.

In a dining room, a series of tubes sets the rhythm of the main wall. In an office, this wall sconce provides a pleasant background light, next to the work lamp. For a pair, measure the same distance from the axis of the furniture or the bed, so that the 2 columns stay aligned.

Lino takes 2 GU10 LED bulbs of 10 W maximum each, not included. The light fixture is rated IP20, so it is intended for dry rooms only. The electrical connection must be carried out by a qualified electrician. For maintenance, switch off the power, then dust the wood with a soft, dry cloth.

Frequently asked questions about the Lino wall sconce

Which bulbs does the Lino wall sconce need?

2 GU10 LED bulbs of 10 W maximum each. They are not included with the light fixture.

What are its dimensions?

The Lino wall sconce measures 6 cm long, 8 cm wide and 30 cm high.

Can it be installed in a bathroom?

No. The Lino wall sconce is rated IP20: it is intended for dry rooms only.

What materials is it made of?

It combines natural wood and steel.

Which direction does it light?

Upward and downward, thanks to its 2 bulbs.