Ceiling Light Fixture | PIXAR

The Pixar ceiling light by Sollux Lighting is a small aluminum cube, mounted against the ceiling, that lights downward and lets the light escape through the slots in its sides. It measures 10 cm long, 10 cm wide and 10 cm high, takes a G9 bulb and comes in white, gray or black.

A designer ceiling light with glowing slots

Pixar is recognizable by its linear perforation. The slots in the aluminum shade let the rays through. On this designer ceiling light, they create a futuristic effect.

When lit, the cube projects fine lines of light around it. The ceiling becomes a small geometric pattern. When off, the slots draw discreet lines on each side.

Its geometric shape makes it a good complement to modern or industrial interiors. It underlines the contemporary character of a room. The edges of the cube stay sharp and precise.

A surface-mounted spotlight that lights downward

The cube is fixed directly to the ceiling. This surface-mounted spotlight lights downward. It forms a clean spot of light on the floor or on a piece of furniture.

The light also spreads through the slots. You therefore get 2 effects, a useful light downward and decorative rays around the cube. The effect is most visible in the evening.

You choose the tint with the bulb. A warm white softens the room. A neutral white emphasizes the graphic look of the fixture.

An aluminum cube, in 3 colors

The cube is aluminum. At 10 cm on each side, this aluminum ceiling light stays very compact. It suits low ceilings and small rooms.

White blends into a painted ceiling. You then mostly see the light and the slots. Black marks the ceiling with a graphic point.

Gray offers a discreet compromise. It goes with concrete, stone and brushed metal. The 3 colors have the same dimensions and mix easily within the same home.

Where to install this hallway ceiling light?

This hallway ceiling light is installed in a series, at regular intervals. The rays from the slots animate the ceiling all along the passage. In an entryway, a single cube is most often enough.

In a living room, this ceiling light highlights an armchair, a console or a shelf. In a bedroom, it lights the wardrobe or the reading corner. In a dining room, several cubes follow the table. In an office, it lights the worktable.

Pixar takes 1 LED G9 bulb of 12 W maximum, not included. The fixture is rated IP20, so it is intended for dry rooms only. The electrical connection must be carried out by a qualified electrician. For maintenance, switch off the power, then wipe the aluminum with a soft, dry cloth.

Frequently asked questions about the Pixar ceiling light

Which bulb does the Pixar ceiling light need?

An LED G9 bulb of 12 W maximum. It is not included with the fixture.

What are its dimensions?

The Pixar ceiling light measures 10 cm long, 10 cm wide and 10 cm high.

In which direction does it light?

It lights downward. The light also spreads through the slots in the shade.

Can it be installed in a bathroom?

No. The Pixar ceiling light is rated IP20: it is intended for dry rooms only.

What colors does it come in?

In 3 colors: white, gray or black.