Comment fixer un abat-jour sur une lampe

How to attach a lampshade to a lamp?

A lampshade is essential for dimming a lamp’s light or redirecting it. Since it comes attached to some lamps available on the market, nothing prevents you from buying one separately. This means you’ll need to attach it yourself. We’ll show you how.

how to attach a lampshade to a lamp

Taking measurements to get started

The dimensions of your lampshade and its components must match the specifications of your ceiling-hung or floor-standing light. You’ll need to know them precisely before attaching it. Take a ruler and hold it above the lampshade to measure the top diameter.

You can use either centimeters or inches as your preferred unit. Once you have noted this down, continue by measuring the bottom diameter. This means turning the lampshade over before placing the ruler over its bottom opening. If the lamp neck is visible above the lampshade, consider getting a longer lampshade.

To continue measuring before attaching the lampshade to your ceiling-hung or floor-standing light, you need to turn the shade over. This lets you position the top facing up before measuring the side height of the lampshade.

Measure this height from top to bottom. If this height is 2/3 of the height of the lamp base, there should be no obstacle to attaching your lampshade. Nevertheless, before getting started, remember to find out the drop height of the support, that is, the distance between the top of the lampshade and the installer.

how to fit a lampshade on a floor lamp

The right fitter for every type of light fixture

Un raccord araignée doit être associé à une lampe avec harpe. La harpe se fixe à la base de la lampe et le raccord araignée au-dessus de la harpe. Utilisez un fleuron pour visser le raccord sur le dessus de la harpe. L’abat-jour se place sur la harpe métallique amovible de votre luminaire suspendu ou à poser.

Smaller table lamps or swing-arm wall sconces are best suited to a UNO fitter. It attaches directly to the lamp socket with an inner ring, which is held in place by the bulb.

For anyone wondering how to attach a shade to these fixtures, no tools are needed. Simply screw in the bulb before attaching the lampshade. Note that a UNO fitter is also the best choice for bridge-arm floor lamps.

However, if you need to attach a lampshade to nightlights, small accent lamps, or a hanging chandelier, it’s best to use a clip-on fitter. As the name suggests, it clips directly onto the bulb.

It is available in various sizes and shapes to suit the size and shape of your bulb. Options on the market include:

  • Cone clip-on lampshades
  • Bell clip-on lampshades
  • Coolie clip-on lampshades
  • Drum lampshades
  • Lamp shade with a clip-on fitter
how to fit a lampshade on a glass tube lamp

    For every lamp base shape, a matching lampshade

    To make sure you successfully install your lampshade on a lamp, you should also make sure the shape of your lampshade matches the shape of the lamp’s base. So, hang your round light fixture from a ceiling hook with a round lampshade.

    On the other hand, if your lamp has an angular or square shape, you’re better off choosing a square lampshade. Chandelier lamps are an exception, though. With their many curves and angles, they can suit lampshades of any shape. You can also use a round lampshade with a square lamp on a round table.

    To ensure your lampshade is properly installed on a lamp, make sure the lampshade is wider than the base plate.

    NAlso remember to consider the atmosphere of your room. A smooth lampshade works well in a modern interior, while a pleated lampshade suits an older-style interior, such as Victorian or antique.

    how to change a lampshade on a lamp

    How to install a lampshade depending on the type of lamp:

    Whichever lampshade you choose, the actual installation is always carried out in the same way when it involves a pendant light:

    • Remove the socket and plug from the DCL box
    • Insert the wires into the DCL plug, connecting the ground wire in the middle, the live wire to the terminal, and the neutral wire to terminal N.
    • Tighten the plug's wire cover around the cable.
    • Clip the plug into the ceiling box before hanging the light fixture from the hook and refitting the wire cover.

    L’opération est beaucoup plus simple avec une table lamp, car après avoir dévissé l’ampoule et la bague intermédiaire, il suffit de placer l’abat-jour sur la douille de la lampe avant de remettre cette bague et l’ampoule. Il ne restera plus qu’à brancher et allumer la lampe pour en vérifier le fonctionnement.


    2 comments


    • Mullot Serge

      Je veux remplacer un abat jour conique diametre 50 cm qui est pose sur un lampadaire halogène, il est fixe par 4 crochets sur le pourtour de la coupole halogene dia 30 environ, je ne trouve pas …


    • jeanne chalencon

      j ai un abat jour ancien 2 5 cm que je souhaite installer sur pied moderne 4 5 cm existe il un outil pour cette adaptation merci


    Leave a comment

    Please note, comments must be approved before they are published

    This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


    Our Best Sellers