Light Switch | TOGGLE

The Toggle toggle switch by Buster + Punch is a 1 gang two-way switch, made up of a knurled solid metal toggle and a flat plate. Its plate measures 9 cm by 9 cm, it is rated 10 AX at 220 to 250 V and comes with linear or cross knurling, with or without a logo.

A metal switch with linear or cross knurling

The toggle of this metal switch is made of solid metal. Two knurling patterns are available. The linear knurling, called Linear, is a diamond-cut pattern of lines, a new addition from the brand. The cross knurling, called Cross, is a crisscross pattern, cut into diamond points.

The flat plate combines stainless steel and polycarbonate. It is held in place by the brand's signature screws. Once fitted, it leaves a 6.5 mm shadow gap with the wall.

The plate comes with the Buster + Punch logo or without any marking. On the switch without a logo, only the toggle and the screws stand out from the wall. The toggle and the electrical specifications are the same in each of the 2 cases.

1 gang two-way switch: control and installation

This two-way switch controls the same light from 2 locations, for example at the 2 ends of a hallway. It also works as a one-way switch, from a single point. For control from 3 points, it pairs with an intermediate module from the brand.

It is rated 10 AX at 220 to 250 V, 50 Hz. It is not suitable for motors, fans or other large inductive loads. It is designed for indoor use, away from moisture.

The box contains 1 wall plate, 1 toggle module and 1 finishing kit for the toggle. The switch is installed on a European-standard wall box, mounted flush with the wall. The electrical connection must be carried out by a qualified electrician.

Switch in brass, steel, smoked bronze, black or white

This brass switch is also available in steel, smoked bronze, black and white. The cross knurling adds a sixth version, which pairs a black plate with orange details. Black and white blend into the decor and let the relief of the toggle make the difference.

Brass and smoked bronze warm up a light-colored wall. The steel version remains more neutral and goes well with the other metal elements in the room.

This switch can be combined with the brand's matching dimmers, sockets and USB modules. The linear knurling is also available on its dimmers, which lets you keep the same pattern throughout the home. To bring 2 toggles together on a single gang, the brand offers the Double Toggle switch.

Frequently asked questions about the Toggle switch

Is the Toggle switch a two-way switch?

Yes. It controls a light from 2 points and also works as a one-way switch.

What is the difference between linear knurling and cross knurling?

The linear knurling is cut in lines, the cross knurling in a crisscross pattern. The black finish with orange details is only available with cross knurling.

What is the difference between the version with a logo and the version without a logo?

Only the plate changes: one bears the brand's logo, the other is left plain. The toggle and the electrical specifications are the same.

What are the dimensions of the plate?

The plate measures 9 cm wide and 9 cm high.

Can it be installed in a bathroom?

No. The switch is designed for indoor use and is not suitable for damp environments.