Dimmer Switch | DIMMER (120W)

The Dimmer rotary dimmer from Buster + Punch is a 1 gang light dimmer, made up of a solid metal knob with linear knurling and a flat plate, with or without logo. Its plate measures 9 cm by 9 cm, it accepts 5 to 120 W of LED bulbs at 230 V and comes in brass, steel, smoked bronze, black and white.

A metal dimmer with linear knurling, with or without logo

The knob of this metal dimmer is made of solid metal. It features the brand's linear knurling, called Linear, the most recent linear pattern from Buster + Punch. This texture gives a good grip when you adjust the lighting.

The flat plate is made of stainless steel and polycarbonate. Torx screws hold it in place. Once the dimmer is installed, a 6.5 mm shadow gap separates the plate from the wall.

Two faceplates are available. The first bears the Buster + Punch logo, the second is left completely plain. The dimmer is the same in both cases, only the look of the plate changes.

120 W LED dimmer: permitted load and two-way switching

This LED dimmer accepts a load of 5 to 120 W of dimmable LED bulbs. With halogen or incandescent bulbs, the range is 60 to 400 W. It operates at 230 V, 50 Hz.

Pressing the knob turns the light on or off, and turning it adjusts the brightness. The light comes on gradually: full brightness may be reached after 1 to 2 seconds. The dimmer is not suitable for non-dimmable bulbs, compact fluorescent bulbs, fans or other motors.

This two-way dimmer can replace one of the 2 switches of a light controlled from 2 locations. It can also be installed on its own, on a light controlled from a single point. A circuit takes only one dimmer, and this model is not compatible with the brand's push-buttons or multi-way dimmers. The electrical connection must be carried out by a qualified electrician.

Dimmer in brass, steel, smoked bronze, black or white

This 120 W model is available in brass, steel, smoked bronze, black and white. The brass dimmer and the smoked bronze version bring a warm tone to a light-colored wall. Steel remains more neutral, while black and white stay discreet.

The box contains 1 wall plate, 1 dimmer module, 1 finishing kit for the knob and 1 Torx screw cover kit. The dimmer is fitted on a European-standard wall box, mounted flush with the wall. It is for indoor use only, away from moisture.

This light dimmer belongs in a living room, a dining room or a bedroom, wherever you like to turn the lighting down in the evening. It pairs with the brand's toggle switches with linear knurling, to keep the same metal and the same pattern from one room to the next.

Frequently asked questions about the Dimmer 120 W dimmer

What wattage of LED bulbs does the Dimmer 120 W dimmer accept?

5 to 120 W of dimmable LED bulbs. With halogen or incandescent bulbs, 60 to 400 W.

Does the Dimmer 120 W dimmer work in a two-way circuit?

Yes. It replaces one of the 2 switches on the circuit. Only one dimmer is permitted per circuit. For a push-button circuit, the brand offers the Dimmer 250 W.

What is the difference between the version with logo and the version without logo?

Only the faceplate changes: one bears the brand's logo, the other is left plain. The dimmer is the same.

What are the dimensions of the plate?

The plate is 9 cm wide and 9 cm high.

Can it be installed in a bathroom?

No. The dimmer is for indoor use only and is not suitable for damp environments.