Ceiling Light Fixture | CAGED (Large)

The large model of the Caged ceiling light by Buster + Punch is a matte black metal cage that drops from a square plate of polished marble and leaves the bulb fully visible. It measures 53 cm high and 17 cm per side, takes 1 E27 bulb and comes in 2 finishes, black marble and white marble.

A cage ceiling light in matte black metal

The structure of this cage ceiling light is made of steel, in a matte black finish. It starts from the ceiling and frames the bulb. Nothing hides the light source, which becomes the center of the light fixture.

The knurled lamp holder is also in matte black. Its crosshatched knurling corresponds to the cross knurling, called Cross. This detail gives the metal texture and is the signature of the light fixture.

At 17 cm per side, this ceiling light fixture takes up little surface area. It is its height of 53 cm that gives it presence. It gets noticed without cluttering the ceiling.

A polished marble plate, black or white

The base of this marble ceiling light is a square plate of polished stone, set against the ceiling. The metal cage is fixed to it. As marble is a natural stone, its veining differs from one piece to the next.

In black marble, the plate extends the cage and the whole stays dark. In white marble, it comes close to the shade of a pale ceiling and lets the black cage stand out. The steel structure stays in matte black in the 2 cases.

The brand has provided an interchangeable panel, which can therefore be replaced. The mounting method must be suited to the type of ceiling.

Which E27 bulb for the large model of the Caged ceiling light?

The ceiling light takes 1 E27 LED bulb of 5 W maximum, sold separately. It was designed to showcase the Buster Bulb Tube by Buster + Punch, a tubular bulb 35 cm long. Its elongated format follows the vertical line of the cage.

The bulb is bare and can be seen from anywhere in the room. Its appearance is therefore part of the light fixture, just like the metal and the stone. If you install several ceiling lights, fit them all with the same bulb.

The ceiling light is compatible with a dimmer, if the bulb is too. The Buster Bulb Tube comes in a dimmable version and a non-dimmable version. The dimmer is not included.

Where to install this designer ceiling light?

Buster + Punch intends this designer ceiling light for rooms with high ceilings. As it drops 53 cm, check the available height before installation, especially in a walkway. It fits into a living room, a dining room, a kitchen, a bedroom, an office, a hallway or a stairwell.

It can be installed on its own or in a group, lined up above a table or a kitchen island. The Caged range also includes 2 other ceiling light models, the 4.0 and 5.0, as well as sconces that use the same cage and the same marble. You can thus match the walls and the ceiling of the same room.

The light fixture is rated IP20, so it is reserved for dry rooms. The electrical connection must be carried out by a qualified electrician. Mounting hardware is not included: choose it according to the type of ceiling. For cleaning, switch off the power and wipe with a soft, dry cloth.

Frequently asked questions about the large model of the Caged ceiling light

Which bulb does the large model of the Caged ceiling light need?

It needs 1 E27 LED bulb of 5 W maximum. It is not included with the light fixture. The ceiling light is designed for the Buster Bulb Tube by Buster + Punch, sold separately.

What are the dimensions of the large model of the Caged ceiling light?

It measures 53 cm high. Its square base is 17 cm per side.

Can it be installed in a bathroom?

No. The large model of the Caged ceiling light is rated IP20: it is reserved for dry rooms.

Is it compatible with a dimmer?

Yes, provided you use a dimmable bulb. The dimmer is not included with the light fixture.

Which materials and finishes does it come in?

The cage is made of steel, in a matte black finish, and the plate is polished marble. It comes in 2 finishes: black marble and white marble.