Pendant Light | HOOKED 1.0

The Hooked 1.0 Nude pendant light by Buster + Punch is a shadeless pendant light, pared down to the essentials: a knurled solid metal lamp holder, a cable and a hook. It measures 8 cm in diameter, its lamp holder is 10.5 cm high, it takes 1 E27 bulb and comes in 3 finishes: brass, smoked bronze and steel.

A lamp holder pendant light without a shade

This lamp holder pendant light leaves the bulb fully visible. Without a shade, the light fixture comes down to its lamp holder, its cable and its hook. It is the most stripped-back version of the range, as its name, Nude, suggests.

The pendant light measures 8 cm in diameter and its lamp holder 10.5 cm in height. This small format fits in where a shade would be too much.

Buster + Punch also offers Hooked metal shades, sold separately, in the graphite or stone color. The Hooked 1.0 pendant light with shade, in the large model, in fact brings together this same pendant light and a large shade.

Solid metal, crisscross knurling and matte rubber

The lamp holder of this minimalist pendant light is made of solid metal. It features the cross knurling, known as Cross, a diamond-cut pattern. Matte rubber details complement the metal.

The ceiling rose and the hook are also made of solid metal. The hook, which is included, attaches to this ceiling rose or screws separately into the ceiling. The light therefore falls exactly where it is wanted, even if the electrical supply point is offset.

Three finishes are available. The brass has a golden tone, the smoked bronze a brown tone and the steel silvery reflections. The brand points out that all its finishes develop a patina over time.

Which E27 bulb for a pendant light with an exposed bulb?

The pendant light takes 1 E27 bulb of 40 W maximum, sold separately. As nothing hides it, the bulb is what gives the light fixture its look. A decorative globe-shaped bulb, in clear or tinted glass, changes the result noticeably.

Buster + Punch specifies an LED source for this light fixture and offers its own bulbs. The pendant light accepts a dimmer, provided you choose a dimmable bulb, and this dimmer is not included.

200 or 260 cm cable: where to install this pendant light?

The cable comes in 2 lengths: 200 cm, that is 2 m, or 260 cm, that is 2.6 m, the latter with the brass finish. The height is adjusted at the time of installation. The excess cable is stored in the cavity provided for this purpose, or the cable is cut to length by an electrician.

This bare bulb pendant light can be installed on its own, for example on each side of a bed in a bedroom. It can also be lined up in a row above a dining table or a kitchen counter. Finally, it suits a living room, a hallway, a stairwell or an office. For more presence, the range includes a Hooked 1.0 pendant light with shade, in the small or large model.

The light fixture is rated IP20, so it is reserved for dry rooms. The electrical connection must be carried out by a qualified electrician. Ceiling mounting hardware is not included. For maintenance, switch off the power, then wipe the metal with a dry, lint-free cloth, with no chemical products.

Frequently asked questions about the Hooked 1.0 Nude pendant light

Which bulb does the Hooked 1.0 Nude pendant light need?

An E27 bulb of 40 W maximum. It is not included. As it remains visible, its appearance matters as much as its light.

What are the dimensions of the Hooked 1.0 Nude pendant light?

It measures 8 cm in diameter and its lamp holder 10.5 cm in height. The cable measures 200 cm or 260 cm depending on the length chosen.

Can a shade be added?

Yes. Hooked shades are sold separately, in 2 sizes and in 2 colors, graphite and stone.

Can it be installed in a bathroom?

No. The Hooked 1.0 Nude pendant light is rated IP20: it is reserved for dry rooms.

Which finishes does it come in?

In 3 finishes: brass, smoked bronze and steel.