
LED Compensator
- Manufacturer warranty 2 years
- 14-day returns
- Parcel tracking on every order
- Pay in 3 instalments with Klarna
SPECIFICATIONS AND DIMENSIONS
DIMENSIONS AND MOUNTING
LIGHT
MATERIAL AND USE
PRO DATA
OUR ADVICE
INSTALLATION AND DOCUMENTS
Connection must be carried out by a qualified electrician.
Free download, no account needed.
DELIVERY AND RETURNS
Estimated home delivery in 3 to 10 days, for an order placed today.
A tracking number is sent to you when the order ships. If you order several products, they may arrive in several parcels, at no extra cost.
This light is covered by the Buster + Punch 2-year commercial warranty against manufacturing defects. It is in addition to your statutory rights: the legal guarantee of conformity, valid for 2 years from delivery, and the guarantee against hidden defects.
Read our terms and conditions of saleYou have 14 days after delivery to change your mind, using the “Exercise my right of withdrawal” button on the website.
The light is returned directly to the manufacturer, at your expense. Contact our customer service team and they will give you the return address.
Please return it complete, with its accessories and instructions, in its original packaging if possible.
Read the returns policyDESCRIPTION
The LED compensator for dimmers from Buster + Punch is a black polycarbonate module that improves the stability of LED bulbs on a dimmer-controlled circuit. It runs on a 230 V, 50 Hz mains supply and is used only with trailing-edge dimmers.
LED compensator: less flicker at low brightness
On a circuit with a dimmer, LED bulbs can sometimes flicker or lack stability when you turn the brightness down. This LED compensator, also known as a load regulator, improves their stability. It can also improve the dimmer's lowest settings.
With certain bulb combinations, it stabilizes the lighting at low brightness. The dimming range is thereby extended downward. The result therefore depends on the bulbs installed.
LED bulbs that stay on: dimmer standby
Another case it addresses: LED bulbs that stay on dimly while the dimmer is off. This happens with remote-controlled dimmers, whose standby current can be enough to power LEDs.
According to the brand, a single compensator is enough to solve this problem. It is connected in parallel with one of the LED light fixtures on the circuit.
This happens because of the way the dimmer works: it lets a small current through even when switched off. The less power the LED bulbs draw, the more sensitive they are to it. The compensator absorbs this residual current, so the bulbs stay fully off.
Trailing-edge dimmer: compatibility and installation
This electrical module is compatible only with a trailing-edge dimmer. Check your dimmer type before ordering. It runs on a 230 V, 50 Hz mains supply.
The compensator is made of polycarbonate, in a black finish. The box contains 1 compensator module.
It is not suitable for damp environments. The electrical connection must be carried out by a qualified electrician.
When should you add a compensator to an LED circuit with a dimmer?
The compensator is worthwhile when the lighting shows a visible problem: flicker at low intensity, light that does not go down to the lowest setting, or bulbs that stay faintly lit after switching off. If your circuit works without any fault, it is not needed.
Before ordering, check in your dimmer's instructions that it is a trailing edge dimmer. On another type of dimmer, the compensator must not be installed.
The module is connected in parallel with one of the LED lights on the circuit, and according to the brand a single one is enough to solve the standby problem. As with any work on an electrical circuit, it is fitted with the power switched off at the breaker.
The compensator is 17.5 cm high and 2.43 cm wide. Before fitting, check the space available at the connection point, close to the chosen light.
The compensator does not replace the choice of bulbs. For a stable circuit, preferably use dimmable LED bulbs, all of the same model on the same circuit. The compensator then comes in if a fault persists despite these precautions. Once connected, it stays hidden. During any later work on the circuit, have its connection checked, with the power off. It suits a new installation as well as an existing circuit during a renovation. The module is sold individually.
THE BRAND BUSTER + PUNCH
Buster + Punch is a London brand founded in 2013 by architect Massimo Buster Minale, known for its industrial design and knurled metal details.
- Lights, bulbs and electrical fittings: switches, dimmers, plates.
- Fittings from the brand’s European range, with French-format sockets.
FREQUENTLY ASKED QUESTIONS
To improve the stability of LED bulbs on a circuit with a dimmer, particularly at low brightness.
Only with trailing-edge dimmers.
For bulbs that stay dimly lit once the dimmer is off, the brand states that a single one is enough.
In parallel with one of the LED light fixtures on the circuit. Installation should be entrusted to a qualified electrician.
No. It is not suitable for damp environments.
ASK A QUESTION
A question about this light? Write to us and our team will reply by email.
ARCHITECTS AND PROFESSIONALS
Architects, interior designers, hotels, restaurants, developers: send us your list of lights and we reply with a complete quote.
Discover more lights from Buster + Punch
View allAsk a question
A question about this light? Write to us and our team will reply by email.

