
Electrical Module | MODULE (1-10V Dimmer)
- Manufacturer warranty 2 years
- 14-day returns
- Parcel tracking on every order
- Pay in 3 instalments with Klarna
SPECIFICATIONS AND DIMENSIONS
LIGHT
MATERIAL AND USE
PRO DATA
OUR ADVICE
INSTALLATION AND DOCUMENTS
Connection must be carried out by a qualified electrician.
Free download, no account needed.
DELIVERY AND RETURNS
Estimated home delivery in 3 to 10 days, for an order placed today.
A tracking number is sent to you when the order ships. If you order several products, they may arrive in several parcels, at no extra cost.
This light is covered by the Buster + Punch 2-year commercial warranty against manufacturing defects. It is in addition to your statutory rights: the legal guarantee of conformity, valid for 2 years from delivery, and the guarantee against hidden defects.
Read our terms and conditions of saleYou have 14 days after delivery to change your mind, using the “Exercise my right of withdrawal” button on the website.
The light is returned directly to the manufacturer, at your expense. Contact our customer service team and they will give you the return address.
Please return it complete, with its accessories and instructions, in its original packaging if possible.
Read the returns policyDESCRIPTION
The 1-10V dimmer module by Buster + Punch is a rotary dimmer with 1-10 V control, to be mounted on one of the brand's modular wall plates. It controls dimmable ballasts, its built-in switch accepts 6 A at 250 V and it is sold on its own, without plate or knob.
1-10V dimmer: a module for dimmable ballasts
This 1-10V dimmer adjusts the lighting through a control signal. It is designed for dimmable high-frequency ballasts that require a 0-10 V or 1-10 V signal. It controls one or more ballasts, up to 20 mA on its control output.
This electrical module is intended for this use and for no other. The brand specifies that any other use damages the dimmer. The 1-10 V control terminals must never be connected to the mains.
Two-way rotary dimmer: control and wiring
This rotary dimmer is switched on and off by pressing the knob, and it retains the selected level. You turn the knob to adjust the brightness. The rotation is smooth and silent.
It is wired as a one-way switch, from a single point, or as a two-way switch, from 2 points. In the latter case, the other control point takes an ordinary two-way switch. Only one dimmer is allowed per circuit.
The built-in switch accepts a maximum of 6 A at 250 V, at 50 Hz. If the circuit powers LED bulbs or drivers, their inrush current must not exceed 6 A. The electrical connection must be carried out by a qualified electrician.
Wall plate and dimmer knob to plan for
The package contains 1 dimmer module (1-10V) and 1 anti-rotation adapter, without plate or knob. This module is specific to Buster + Punch and works only with the brand's dimmer knobs.
It is completed with a wall plate with inserts, from 1 to 4 gang, each opening of which takes 1 dimmer. The plate without inserts, reserved for sockets and data modules, is not suitable. You also need a dimmer finishing kit, which provides the solid metal knob, with linear knurling, called Linear, or cross knurling, called Cross.
The assembly is fitted on a European-standard wall box, mounted flush with the wall. The module is not suitable for damp environments. It works in a living room, a dining room, an office or a kitchen.
1-10V dimmer or LED dimmer: which one should you choose?
The 1-10V dimmer is only used with lighting fitted with ballasts or drivers controlled by a 1-10 V signal. It is found, for example, on some light fixtures with a 1-10 V dimmable LED driver. Check the instructions of your ballast or driver before buying, and have the choice approved by your electrician.
For dimmable LED bulbs screwed into a socket, choose the brand's 120W LED dimmer module instead, as a one-way or two-way switch. For a push-button circuit, Buster + Punch offers its 250W multi-way dimmer module. The 3 dimmers take the same knobs from the brand.
On a multi-gang plate, this dimmer can sit next to toggle switches or other dimmers, each in its own opening. Fit the same finishing kit on all the knobs of the plate, to keep the same knurling and the same finish.
THE BRAND BUSTER + PUNCH
Buster + Punch is a London brand founded in 2013 by architect Massimo Buster Minale, known for its industrial design and knurled metal details.
- Lights, bulbs and electrical fittings: switches, dimmers, plates.
- Fittings from the brand’s European range, with French-format sockets.
FREQUENTLY ASKED QUESTIONS
With dimmable high-frequency ballasts that require a 0-10 V or 1-10 V control signal.
This module is designed for ballasts controlled by 0-10 V or 1-10 V, and for no other use. For dimmable LED bulbs, the brand offers its 120W LED dimmer module.
Yes. It is wired as a one-way or two-way switch, with an ordinary switch at the other control point and only one dimmer per circuit.
A wall plate with inserts and a dimmer finishing kit from Buster + Punch. The module is sold on its own.
No. The module is not suitable for damp environments.
ASK A QUESTION
A question about this light? Write to us and our team will reply by email.
ARCHITECTS AND PROFESSIONALS
Architects, interior designers, hotels, restaurants, developers: send us your list of lights and we reply with a complete quote.
Discover more lights from Buster + Punch
View allAsk a question
A question about this light? Write to us and our team will reply by email.

